Panduit DPOE24S1X Manual de usuario descargar pdf (Pagina 15)

PANDUIT® DPoE™ Power Patch Panel User’s Guide Issue 2.2

Part Number: PN378A

WARNING:

The power supply connections are polarized.

The DPoE™ Power Panel will not function if power is wired improperly.

For Maximum power the overall length of the wire between the power

supply and the DPoE™ Power Panel must not exceed 35 feet.

NOTE:

The included power harness has two wires for the A-feed power only (pins

1 & 2). The DPoE™ Power Patch Panel supports an optional redundant

B-feed power option, but the terminals and wire leads are not attached to

the power harness.

Contact PANDUIT Technical Support for more information about

connecting the redundant B-Feed Power.

14. Lightly tug on the butt spliced connections to verify that the butt splices are secure.

Powering Up the DPoE™ Power Patch Panel

15. Plug the connector into the back of the DPoE™ Patch

Panel.

16. Once power is applied to the unit, the DPoE™ Power Patch

Panel will go through its power up sequence. The following

table describes the behavior of the unit as viewed from the

front and the back.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 63 64

Sin comentarios

Panduit DPOE24S1X Manual de usuario Pagina 15